Restore vintage charm with precision Chromcraft components for your beloved retro seating. We know you’ve got that special chair, the one with the sleek chrome base or the iconic swivel mechanism that screams mid-century cool. Maybe it wobbles a little, or the gas cylinder has given up entirely. That’s where finding the right chromcraft chair parts becomes your secret weapon. You don’t need a brand new chair, you just need the right piece to bring it back to life. It’s about saving something great.
Trust us, its totally worth the effort. You can fix that wobbly base, replace a cracked caster, or swap out a worn-out seat plate yourself. The process is simpler than you think, and the result? A chair that looks and feels like it just left the factory floor. You’ll get that satisfying click when it locks into place and the perfect height adjustment. Let’s put that retro gem back where it belongs — in your home, working perfectly.
Product Comparison Table: 9 Best Chromcraft Chair Parts
| Image | Why We Like This Product | Editor’s Rating | |
 |
Oajen 2″ Chair Caster Wheel Chromcraft, tan, 7/16″ x…
|
9.5 |
Read Review |
 |
#805CC – Chromcraft Swivel Tilt Mechanism – Heavy Duty…
|
9.3 |
Read Review |
 |
Chromcraft Swivel Tilt Mechanism Replacement Part for Caster Chair
|
9.2 |
Read Review |
 |
Chromcraft Set of 4 Bell Glides Replacement Chair Stem…
|
9.0 |
Read Review |
 |
Chromcraft Set of 4 Chair Casters Replacement Rolling Chair…
|
8.8 |
Read Review |
 |
Chromcraft Polyurethane Soft Tread Replacement Casters – Softer Casters…
|
8.6 |
Read Review |
 |
Chromcraft Polyurethane Soft Tread Replacement Casters – Softer Casters…
|
8.4 |
Read Review |
 |
Chromcraft Almond Casters Set of 4 OEM
|
8.3 |
Read Review |
 |
Chromcraft Casters in Brown (Set of 4)
|
8.1 |
Read Review |
Quick Review For Top 9 Chromcraft Chair Parts
Oajen 2" Chair Caster Wheel Chromcraft, tan, 7/16" x 7/8" or 11mm x 22mm Grip Ring stem, Pack of 5
The Oajen 2″ Chair Caster Wheel Chromcraft, tan, 7/16″ x 7/8″ or 11mm x 22mm Grip Ring stem, Pack of 5 is a replacement caster designed for specific dinette chairs and office or home furniture. These are hard wheels, which means they are made for carpeted surfaces. If you have hardwood or tile floors, these are not the right choice, as they could scratch the surface.
The 2-inch diameter is a standard size for many chairs, providing a good balance between stability and rolling ease.
Each caster uses a 7/16″ x 7/8″ grip ring stem. This stem is also compatible with the 11mm x 22mm metric size, so it fits a range of chair legs. The grip ring holds the caster firmly in place, so you should not have to worry about it popping out while you move around. Just push the stem straight into the hole in your chair leg.
It should fit snugly.
This caster is the original equipment manufacturer (OEM) part for Douglas dinette sets. If you own a Douglas dinette chair, this is likely the exact replacement you need. The tan color is also meant to match Chromcraft dinette chairs, though keep in mind that color can vary slightly depending on your monitor. If you have a tan chair from Chromcraft, this should be a close match, but it might not be perfect.
These casters exceed BIFMA quality standards.
#805CC – Chromcraft Swivel Tilt Mechanism – Heavy Duty Swivel – 500 lbs Weight Limit – Hole to Hole – Front 6 1/2" – Back 7 1/4" – Includes 2, #218B Inserts – Made USA – Made to Last – Rated No. 1
The #805CC Chromcraft Swivel Tilt Mechanism is built for heavy duty use with a 500 lbs weight limit. It is made in the USA and rated number one for strength and durability. This is not your standard swivel. X-treme Swivels is the exclusive owner and maker of this mechanism. No one else is allowed to distribute it. You will not find this exact swivel on Walmart.
If you want a Chromcraft swivel that is strong and will last way longer than the standard version, this is the one to get.
What makes this swivel different? The mechanism that attaches to the plate is formed, not welded. There are no welds to break. That means it holds up better under pressure. It uses a solid square 11 gauge thick steel plate for superior support. The shaft is a solid 1 inch diameter. The pivot pin is stronger than what the original manufacturer used.
Everything is made to last.
This replacement swivel and tilt will raise your chair 3/4 inch taller than the original swivel tilter that has been discontinued. That extra height can make a differnce when you are sitting at a counter or table. The package includes two pieces of the original 2 inch diameter seat post bushing plastic inserts. These are the #218B inserts.
Chromcraft Swivel Tilt Mechanism Replacement Part for Caster Chair
The Chromcraft Swivel Tilt Mechanism Replacement Part for Caster Chair is a direct-fit adapter kit designed for older Chromcraft models. It comes with one complete mechanism to replace worn-out parts on your chair or stool.
This kit is guaranteed to fit all older model Chromcraft chairs and bar stools. The mounting hole measurements are specific: the front of the knob horizontal dimension is 6 1/2 inches, and the back of the shaft horizontal dimension is 7 1/4 inches.
Check these before you start to make sure it lines up with your seat. The steel shaft is 1 inch in diameter, so it should slide into the base without any trouble.
You get a full 360 degree swivel with this part. When it is new, the swivel might be a little tight at first. This is normal. It will loosen up with usage as the parts break in together. If you need more control over your rocking motion, the tension of the tilt is adjustable.
You can make it stiffer or looser depending on what feels comfortable for you.
One important thing to rememeber: this part only fits older Chromcraft chairs and Chromcraft bar stools. It is not for newer models or other brands. If you have a vintage Chromcraft, this is the right choice. The kit includes everything you need to replace the old mechanism, so you dont have to hunt for extra hardware.
Installing it is straight forward.
Chromcraft Set of 4 Bell Glides Replacement Chair Stem Casters Replacement Stationary Chair Casters for Chairs and Tables(Black)
The Chromcraft Set of 4 Bell Glides Replacement Chair Stem Casters is a straightforward solution if you need to stop your chairs from rolling around. These are stationary casters, meaning they act as a stopper for both chairs and tables. Instead of moving freely, your furniture stays put, which can be a real help on hard floors or if you just want things to stay where you left them.
Each caster comes with a pole that measures 7/16 inch (11mm) by 7/8 inch (22mm).
This is a common size, making them universal for many chairs. But there is one important thing to know: they are not suitable for IKEA chairs. So if you have IKEA furniture, this set won’t work for you. For everything else, the fit is generally simple and direct. Just check your existing caster stem size to be sure.
These casters can hold a maximum total weight of 300 lbs. That covers most standard dining chairs and small tables.
They convert your rolling casters into fixed bell glides, and they do it without any squeaks. No annoying noises when you sit down or push the chair back. The material and craftsmanship are premium, so they are built to last for a long time. You won’t have to worry about them wearing out quickly or breaking under normal use.
One thing to note: these are designed specifically for Chromcraft chairs casters.
Chromcraft Set of 4 Chair Casters Replacement Rolling Chair Wheels for Chairs and Tables(Black)
The Chromcraft Set of 4 Chair Casters Replacement Rolling Chair Wheels in Black is a straightforward upgrade for your office or home chair. These are universal casters designed to fit most standard chairs, but you should check the size first. The caster pole measures 7/16 inch (11mm) by 7/8 inch (22mm). Important note: these are not suitable for IKEA chairs, so if you have one of those, you will need a different option.
The wheels themselves are double soft wheel casters.
This is the key feature for protecting your floors. They are made to minimize scratches on any floor type, whether you have hardwood, laminate, tile, or carpet. You can roll around without worrying about leaving marks or damage behind. The soft material also helps with noise reduction, giving you ultra mobility and a quite ride.
These casters can hold a maximum of 300 lbs total weight, so they are robust enough for most people and move with ease even under load.
Construction is a focus here. The casters use premium material and good craftsmanship for long-lasting use. You should not have to replace them often. They are built to handle daily rolling and the occasional bump against a desk leg.
Chromcraft Polyurethane Soft Tread Replacement Casters – Softer Casters for Wood or Tile Floors (16)
The Chromcraft Polyurethane Soft Tread Replacement Casters – Softer Casters for Wood or Tile Floors (16) are a simple swap for your office chair. If your current wheels are scratching up your floors or getting stuck, these are made to fix that. They are designed to work on hard surfaces like wood and tile, not thick carpet.
These casters give you enhanced mobility. You can glide smoothly across your floor without that jerky, stuck feeling.
The wheel is made from a plastic core with a 1/4 inch polyurethane coating. This coating is the key. It is soft enough to protect your flooring but tough enough to last. You don’t have to worry about leaving black marks or deep scuffs on your nice hardwood or tile.
Compatibility is a big plus. These fit standard caster chairs. They work with models from Cal-Style, Chromcraft, Douglas, Lisa, Stoneville, and Tempo. If your chair uses a standard stem, these should work.
The stem size is 7/16 inch by 7/8 inch, and the wheel diameter is 2 inches. Just measure your old stem to be sure before you buy.
Installation is easy. You basicly pull out your old casters and push these in. No tools needed. It takes just a few minutes to replace all five wheels. You will notice the difference right away when you sit down and push off.
These are not just for looks. The premium construction means they are built to handle daily use.
Chromcraft Polyurethane Soft Tread Replacement Casters – Softer Casters for Wood or Tile Floors (4)
The Chromcraft Polyurethane Soft Tread Replacement Casters are a practical upgrade for anyone with wood or tile floors. These 4 casters are designed to be softer than standard wheels, so you wont have to worry about scratches or scuffs on your flooring.
Mobility is the main feature here. The casters have a 1/4 inch polyurethane coating over a plastic core. This combo lets your chair glide smoothly across hard surfaces without that jerky, stuck feeling.
You get better movement whether you are sliding across a hardwood office or a tiled kitchen nook. The 2 inch diameter wheels are big enough to roll over small debris or cords without getting caught.
Compatibility is important too. These wheels fit a range of standard caster chairs. They work with models from Chromcraft, Cal-Style, Douglas, Lisa, Stoneville, and Tempo. If you have a common office chair, theres a good chance these will fit.
The stem size is 7/16 inch by 7/8 inch, which is a standard size for many replacement casters. Instalation is simple. You just pull out the old wheels and push these into the chair base. No tools are needed, and it takes only a few minutes per caster.
Durability is also solid. The polyurethane tread is resistant to wear and tear, so you wont have to replace them every few months. The plastic core keeps the wheel lightweight but strong.
Chromcraft Almond Casters Set of 4 OEM
The Chromcraft Almond Casters Set of 4 OEM is a direct replacement set designed to keep your chair moving smoothly. This isn’t a generic or aftermarket part. You are geting four brand new, original equipment manufacturer (OEM) casters from Chromcraft. The color is a consistent almond finish, so they should match older furniture from that brand perfectly.
These casters are built to work on hard flooring surfaces. They roll well on tile, slate, wood, and laminate floors.
The dual wheel design helps distribute weight and reduces the chance of leaving marks on your floors. Each caster has a 2-inch wheel diameter, which is a standard size for many office and dining chairs.
The stem is a grip ring type. It measures 7/16 of an inch in diameter and is 7/8 of an inch long. This is a very common stem size for chairs that use a metal ring to grip the inside of the chair leg. You will need to push the stem firmly into the chair leg until the ring locks into place.
It’s a simple installation process that usually takes just a few second per caster.
One of the best things about this set is how widely it fits. While these are made by Chromcraft, the stem size and wheel design mean they may work with chairs from several other brands. The listing mentions compatibility with chairs made by Douglas, Callee, Tempo, Stoneville, Tobias, and Cal Style. If you have a chair from one of these manufacturers, this set is a very safe bet.
Chromcraft Casters in Brown (Set of 4)
The Chromcraft Casters in Brown (Set of 4) are the same standard casters that come installed on brand new Chromcraft chairs. So if you are replacing old or worn out ones, you are getting the exact factory part. This set gives you four casters, which is what you need for most office or desk chairs.
Each caster features a dual wheel design with 1 3/4 inch wheels. The wheels are made from polyurethane, which is a softer material than your standard caster.
This is important because it means they are gentler on your floors. They will not scratch or scuff your hardwood, laminate, or tile floors, as long as you keep the floor clean. If you let dirt or grit build up, that can cause marks with any caster. But with these, you don’t have to worry about the wheels themselves damaging the surface.
The casters rotate a full 360 degrees, which give you smooth and easy movement in any direction.
You can glide around your workspace without having to struggle or jerk the chair. The rotation is steady and reliable, just like what you would get with a brand new Chromcraft chair.
Installation is really straight forward. You simply pull out your old casters from the chair legs. Then you take the new ones and hammer them in. You can do this with a rubber mallet, or even just push them in by hand if you have enough strenght. It takes just a few minutes to swap out all four.
Chromcraft Chair Parts Buying Guide
Finding chromcraft chair parts means matching exact specifications to restore your seating. Whether you’re fixing a wobbly office chair or replacing a worn-out base, the right part makes all the difference. You don’t want to guess and end up with something that doesn’t fit. Let’s walk through what matters most.
Base and Wheel Compatibility
The base is where everything starts. Measure your chair’s hub diameter and the wheel stem size. Chromcraft chairs often use a 2-inch wheel stem, but older models might differ. A plastic base can crack over time, especially under heavy use. If yours is broken, look for a metal replacement. It’s stronger and lasts longer. Check if the wheel type matches your floor—soft casters for hardwood, hard ones for carpet.
Gas Cylinder and Seat Height
Is your chair sinking when you sit down? That’s the gas cylinder failing. You need the exact stroke length—usually between 4 and 6 inches. Too long and you’ll feel like you’re on a stool. Too short and you’ll be hunched over. Look for a cylinder that matches your chair’s mechanism type. Some Chromcraft models use a two-stage cylinder, others a single-stage. Don’t guess; it’s a pain to swap them out twice.
Armrest and Mechanism Kits
Armrests take a beating. They crack, loosen, or just wear out. Find the mounting style: screws underneath or clips on the side. Some newer models have adjustable armrests, so look for kits that include the hardware. The tilt mechanism is another spot to check. If your chair won’t lock in place, you might need a replacement mechanism. It’s a bit tricky to install, but doable with basic tools.
Always double-check the part number if you can. A small mistake means ordering again. Stick with trusted sellers who offer returns—it saves headaches later.
Frequently Asked Questions About Chromcraft Chair Parts
Do all Chromcraft chairs use teh same parts?
Not exactly. Different Chromcraft chair models have different part sizes. The most common parts are gas cylinders, tilt mechanisms, and casters. But you need to check your chair’s model number. This helps you find the right fit. Most parts are interchangeable within the same series.
How do I know which gas cylinder I need?
Measure your current cylinder. You want the length from the base to the seat mount. Standard sizes are 8, 10, and 12 inches. Also check the diameter. Most Chromcraft chairs use a 1.5-inch or 2-inch cylinder. If your chair wobbles, a new cylinder usualy fixes it.
Can I replace the tilt mechanism myself?
Yes, you can. It’s a simple job with basic tools. You need a screwdriver and maybe a wrench. Just unbolt the old mechanism. Then bolt the new one in place. Make sure you get the right model. Chromcraft tilt mechanisms come in standard and heavy-duty options.
What about casters? Do they fit any floor?
Casters come in different types. Hard casters work best on carpet. Soft casters are for hard floors like wood or tile. You can swich them out easily. Just pull the old caster out and push the new one in. Measure the stem size first. Most Chromcraft chairs use a 7/16-inch stem.
Are seat pads and backrests available seperately?
Yes, they are. You can buy new seat pads and backrests. They come in different colors and materials. Just match the size and shape to your chair. Some parts are sold as complete sets. Others are sold individually. Check the product details to see what’s included.
How long do Chromcraft chair parts usually last?
It depends on use. Gas cylinders last about 3 to 5 years. Casters can last longer if you clean them regularly. Tilt mechanisms may last 5 years or more. Replacing worn parts keeps your chair comfortable and safe. Dont wait until the chair breaks.
Where can I find my chair’s model number?
Look under the seat. The model number is often on a sticker or stamped into the frame. It might say “Chromcraft” followed by numbers. Write it down before ordering parts. This helps you get the exact match.
Bottom Line
Getting your favorite chair back in shape doesn’t have to be a headache. By focusing on teh right replacement pieces, you can save time and avoid costly mistakes. Just take it step by step. Measure twice, order once. Check the model number on your chair if you have it. That little detail can save you from guesing and getting the wrong fit. A little patience goes a long way when you want everything to feel sturdy and look original again.
You have everything you need to finish the job. Stick with quality components that match your furniture’s design and age. That way your chair will feel solid and look great for years to come. Whether you are fixing one seat or a whole set, the right choices make all the difference. Authentic chromcraft chair parts help you keep that vintage look without any hassle. Now you can sit back and enjoy your restored furniture.
